Kifco Water Pumps
Slurry & Wastewater Pumps
All Kifco wastewater & slurry pumps are single-stage centrifugal pumps with mechanical seals and integrated gearboxes. We offer four standard slurry pump models.
• The pump volute and impellers are made from spheroidal graphite (SG) iron
• Three vaned open impeller pumps include a serrated inlet with an optional rotating knife
• These pumps are capable of handling troublesome solids, including most animal waste
• Gooseneck fitting allows the pump discharge to be made in multiple directions without the need to move the pump
All Kifco wastewater & slurry pumps are single
stage centrifugal pumps with mechanical seals
and integrated gearboxes. The pump volute and
impellers are made from spheroidal graphite
(SG) iron
• Three vaned open impeller pumps include a
serrated inlet with an optional rotating knife.
These pumps are capable of handling troublesome solids, including most animal waste
• Other models available as quote only. Contact
Kifco for more information.
• Gooseneck fitting allows the pump discharge to
be made in multiple directions without the need
to move the pump
All Kifco wastewater & slurry pumps are single
stage centrifugal pumps with mechanical seals
and integrated gearboxes. The pump volute and
impellers are made from spheroidal graphite
(SG) iron
• Three vaned open impeller pumps include a
serrated inlet with an optional rotating knife.
These pumps are capable of handling troublesome solids, including most animal waste
• Other models available as quote only. Contact
Kifco for more information.
• Gooseneck fitting allows the pump discharge to
be made in multiple directions without the need
to move the pump.
All Kifco wastewater & slurry pumps are single
stage centrifugal pumps with mechanical seals
and integrated gearboxes. The pump volute and
impellers are made from spheroidal graphite
(SG) iron
• Three vaned open impeller pumps include a
serrated inlet with an optional rotating knife.
These pumps are capable of handling troublesome solids, including most animal waste
• Other models available as quote only. Contact
Kifco for more information.
• Gooseneck fitting allows the pump discharge to
be made in multiple directions without the need
to move the pump.
All Kifco wastewater & slurry pumps are single
stage centrifugal pumps with mechanical seals
and integrated gearboxes. The pump volute and
impellers are made from spheroidal graphite
(SG) iron
• Three vaned open impeller pumps include a
serrated inlet with an optional rotating knife.
These pumps are capable of handling troublesome solids, including most animal waste
• Other models available as quote only. Contact
Kifco for more information.
• Gooseneck fitting allows the pump discharge to
be made in multiple directions without the need
to move the pump.
PTO Driven Pumps
PTO Pumps are driven from a PTO shaft with maximum tractor output of 540 to 1000 RPMs and are available as bare pumps, mounted on a cart or 3-point frame, or fully fitted. We offer a wide range of PTO pumps to choose from.
Compact, reliable PTO pump capable of 50 to 185 gpm
with corresponding pressures of 146 to 123 psi using
13 to 23 hp
• Available with heavy duty two wheeled trailer or galvanized three point mount
• Designed with industry leading oil lubricated step up
gearbox (no belts or pulleys) with shafts supported by
widely spaced bearings
• Easily replaceable packing gland type water seal
• Pumps can be fitted with 2” female thread discharge
priming valve, hand primer, fluid filled pressure gauge,
short suction adapter with 2” female pipe thread and #6
heavy duty 1 3/8 six spline PTO shaft
Compact, reliable PTO pump capable of 50 to 330 gpm
with corresponding pressures of 90 to 70 psi using 8.5
to 20 hp
• Available with heavy duty two wheeled trailer or galvanized three point mount
• Designed with industry leading oil lubricated step up
gearbox (no belts or pulleys) with shafts supported by
widely spaced bearings
• Easily replaceable packing gland type water seal
• Pumps can be fitted with 2” female thread discharge
priming valve, hand primer, fluid filled pressure gauge,
short suction adapter with 3” female pipe thread and
#6 heavy duty 1 3/8 six spline PTO shaft
Compact, reliable PTO pump capable of 50 to 280
gpm with corresponding pressures of 137 to 110psi
using 16 to 289hp
• Available with heavy duty two wheeled trailer or
galvanized three point mount
• Designed with industry leading oil lubricated step
up gearbox (no belts or pulleys) with shafts supported by widely spaced bearings
• Easily replaceable packing gland type water seal
• Pumps can be fitted with 2” female thread discharge
priming valve, hand primer, fluid filled pressure
gauge, short suction adapter with 3” female pipe
thread and #6 heavy duty 1 3/8 six spline PTO shaft
Compact, reliable PTO pump capable of 70 to 300 gpm
with corresponding pressures of 171 to 133 psi using
22 to 41 hp
• Available with heavy duty two wheeled trailer or galvanized three point mount
• Designed with industry leading oil lubricated step up
gearbox (no belts or pulleys) with shafts supported by
widely spaced bearings
• Easily replaceable packing gland type water seal
• Pumps can be fitted with 2” female thread discharge
priming valve, hand primer, fluid filled pressure gauge,
short suction adapter with 3” female pipe thread and
#6 heavy duty 1 3/8 six spline PTO shaft
Compact, reliable PTO pump capable of 100 to 425
gpm with corresponding pressures of 108 to 99 psi
using 18 to 35 hp
• Available with heavy duty two wheeled trailer or galvanized three point mount
• Designed with industry leading oil lubricated step up
gearbox (no belts or pulleys) with shafts supported by
widely spaced bearings
• Easily replaceable packing gland type water seal
• Pumps can be fitted with 4” female thread discharge
priming valve, hand primer, fluid filled pressure gauge,
short suction adapter with 4” female pipe thread and
#6 heavy duty 1 3/8 six spline PTO shaft
Compact, reliable PTO pump capable of 150 to 530
gpm with corresponding pressures of 161 to 131 psi
using 29 to 59 hp
• Available with heavy duty two wheeled trailer or galvanized three point mount
• Designed with industry leading oil lubricated step up
gearbox (no belts or pulleys) with shafts supported by
widely spaced bearings
• Easily replaceable packing gland type water seal
• Pumps can be fitted with 4” female thread discharge
priming valve, hand primer, fluid filled pressure gauge,
short suction adapter with 4” female pipe thread and
#6 heavy duty 1 3/8 six spline PTO shaft
Large Primary Pumps
Engine Driven Pump Packages are primary pump & engine combinations mounted on a rugged galvanized frame and are self-contained. Kifco packages are EPA emissions compliant for irrigation use and our standard models are specifically sized to match Kifco Water-Reels.
The pump and engine combination is mounted on a rugged galvanized skid which can be easily converted to a trailer. These packages are capable of continuous operation in demanding environments.
We offer four standard Pump Packages, Models KB2.5JD and KB4JD. Custom-built packages can be ordered for almost any application.
Compatible Water-Reel Model
Kifco T/E180, T/E200S
Kifco T/E200L, T/E210
Kifco T/E25x750, T/E27x980
Compatible Water-Reel Model
Kifco T/E27x980, T/E30x660, T/E30x980,
Kifco T/E30x1200, T/E33x1120. T/E33x1050
Kifco T/E37x1080, T/E37x1220, T/E40x1250
Kifco T/E40x1320, T/E45x1150
Medium Primary Pumps
Kifco’s Medium Primary Pumps are a pump & engine combinations mounted on a rugged galvanized frame and are self-contained. Kifco packages are EPA emissions compliant for irrigation use and our standard model is specifically sized to match Kifco Water-Reels. Custom-built packages can be ordered for almost any application.
• 2.5 AGE Darley Centrifugal Pump close-coupled to Briggs & Stratton gas (35Hp) or Kubota diesel (42Hp) engines
• Low oil & high water temp. safety shutdown on 42Hp Kubota engine
• Both models are standard on a small skid with trailer upgrade available and feature Murphy High/Low Switch for automatic shutdown, canopy roof enclosure, and a 50-gallon fuel cell
Compatible Water-Reel Model
Kifco T/E180, T/E200S
Kifco T/E 200L, T/E210
Kifco T/E25x750, T/E27x980
Compatible Water-Reel Model
Kifco T/E25x750, T/E27x980
Kifco T/E30x660, T/E30x980
Kifco T/E30x1200, T/E33x1120
Small Primary Pumps
Kifco’s small, air-cooled engine driven Primary Pumps are an economical match for our B-Series Water-Reels and smaller Ag-Rain Models.
Kifco’s Small Primary pumps feature heavy-duty Franklin Electric pumps close coupled to Honda, Kohler or Briggs & Stratton engines for a compact, high performing unit. Our High-Pressure Small Primary features a Darley pump & Honda gas engine.
All models come standard on a small skid and feature electronic ignition, low flow shut-off, high temp blow off valve, fuel filter, air filters, muffler, choke and throttle to protect your investment and allow for safe operation.
Compatible Water-Reels
Kifco B110
Kifco E110
Compatible Water-Reels
Kifco B110
Kifco E110
Kifco B140
Kifco E140
Compatible Water-Reels
Kifco T/E180, T/E200S,
Kifco T/E200L, T/E210
Compatible Water-Reels
Kifco T/E180, T/E200S,
Kifco T/E200, T/E210,
Kifco T/E23x600,
Kifco T/E25x750,
Kifco T/E27x980,
Kifco T/E30x660,
Kifco T/E30x980
Kifco Water / Booster Pumps
Booster Pumps provide additional pressure to your Water-Reel when needed to maximize performance. Kifco offers Stand Alone Boosters (pump only) as well as reel-mounted gasoline booster pumps.
Kifco’s standard engine driven reel-mounted booster pumps to feature heavy-duty Franklin Electric centrifugal pumps close coupled to Honda, Kohler Kubota or Briggs & Stratton engines for compact, high performing that mounts directly to your Water-Reel.
Engine-driven booster pumps are equipped with electronic ignition, low flow shut-off, high temp blow off valve, fuel & air filters, muffler, choke and throttle to protect your investment and for safe operation.